CL(IDD)
20 cycles
Row Cycle Time (tRCmin)
45.75ns (min.)
Refresh to Active/Refresh // Command Time (tRFCmin)
350ns (min.)
Kingston HyperX Impact 32GB (16GB 2G // 64-Bit // 2-pcs) DDR4-3200 CL20 260-Pin SODIMM Kit [HX432S20IB2K2/32]
DESCRIPTION
HyperX HX432S20IB2K2/32 is a kit of two 2G x 64-bit (16GB) DDR4-3200 CL20 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit DDR4 FBGA components. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total capacity is 32GB. This module has been tested to run at DDR4-3200 at a low latency timing of 20-22-22 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.
SPECIFICATIONS
CL(IDD)
20 cycles
Row Cycle Time (tRCmin)
45.75ns (min.)
Refresh to Active/Refresh // Command Time (tRFCmin)
350ns (min.)
Row Active Time (tRASmin)
26.25ns (min.)
UL Rating
94 V - 0
Operating Temperature
0°C to 85°C
Storage Temperature
-55°C to +100°C
FEATURES
# Power Supply: VDD = 1.2V Typical
# VDDQ = 1.2V Typical
# VPP = 2.5V Typical
# VDDSPD = 2.2V to 3.6V
# On-Die termination (ODT)
# 16 internal banks; 4 groups of 4 banks each
# Bi-Directional Differential Data Strobe
# 8 bit pre-fetch
# Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
# Height 1.18” (30.00mm)
PnP JEDEC TIMING PARAMETERS:
# JEDEC/PnP: DDR4-3200 CL20-22-22 @1.2V
# XMP Profile #1: DDR4-3200 CL20-22-22 @1.2V
# XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V
MODULE DIMENSIONS